Text Size
péntek, március 29, 2024
Tel.: 06 1 445 05 95 Mobil: 06 20 555 56 41 info@kemenysegmero.hu
absolute méréstechnika kft
Menü
WEBSTER WH100 Hordozható Webster keménységmérőHB120 Hordozható Brinell keménységmérő

HB1500 Hordozható Brinell keménységmérő

HB1500 Hordozható Brinell keménységmérő
A HB1500 hordozható Brinell keménységmérő. A terhelő erő kalibrált törőcsapok által beállított.
HB1500 keménységmérő HB1500 keménységmérő HB1500 keménységmérő HB1500 keménységmérő
  • Solid fine finished C-frame
  • Easy to operate, also under diffuclt and harsh conditions
  • Tolerance of test force <0.5%
  • Test force is controlled by a shear pin
  • Two types of application: C clamp and hammer impact
  • Suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut
  • Accuracy is much higher than any other type hammer impact tester
  • Used to test the hardness of forgings, castings, steels, nonferrous metal and its alloy products, and to test the hardness of annealed, normalizing and tempered mechanical parts.

GENERAL INFORMATION

The HB1500 Portable hardness tester is designed for the Brinell hardness test method. The test force is controlled by calibrated shear pins. After reading the diameter of the indentation with the analogue microscope, the Brinell hardness number can be obtained from the lookup table. Simple and easy to use. The HB1500 has two types of application: C clamp or hammer impact. It is possible to test small to very large specimens. The unit in particular is suitable for assemblies that are inconvenient to be taken to the lab or which cannot be cut in smaller parts.The test can be completed in any direction. The test head itself can be used as a hammer impact tester, where the shear pin will limit the applied force. Therefore its accuracy is much higher than any other type hammer impact tester. Brinell hardness testing, with a testing force of 1580kg, indentor diameter of 7.26mm, then F/D2=30. The test applied by the hydraulic HB1500 is equivalent to the standard Brinell hardness test with 3000kgf and a 10mm ball indentor. The tester can be widely used to test the hardness of forgings, castings, steel samples, nonferrous and alloyed metals. 
Terhelő erő1580kg
Terhelőerő pontosságakb. 0.5%
PontosságIn accordance with ISO 6506
Behatolótest7.26mm acél golyó behatolótest (tartomány: 100-400HB)
4.0mm wolframkarbid golyó behatolótest (Opcionális) (tartomány: 400-650HB)
Nyitástávolság (H×D)150mm×100mm
TömegC fogó 4.2kg
Kalapács 0.8kg

Tegye fel kérdését a termékről


Nyomtatás
Utolsó frissítés: Friday, 29 March 2024 10:11